• SAE J493_201302

SAE J493_201302

  • Rod Ends and Clevis Pins (Stabilized: Feb 2013)
  • standard by SAE International, 02/25/2013
  • Category: SAE

$81.00 $41.00

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Material--SAE 1010 or SAE 1111 steel or equivalent. Clevis pins shall be supplied either soft or cyanide hardened as specified. Clevis pins must be free from burrs, loose scale, sharp edges, and all other defects that might affect their serviceability. General tolerances for all dimensions are plus or minus 0.010 unless otherwise specified.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4501E

SAE AMS4501E

Copper Sheet, Strip, and Plate Oxygen-Free, Light Cold Rolled..

$41.00 $81.00

SAE AMS4274A

SAE AMS4274A

Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024-0) Annealed, Fine Grain..

$41.00 $81.00

SAE AMS4764F

SAE AMS4764F

Copper Alloy, Brazing Filler Metal 52.5Cu - 38Mn - 9.5Ni 1615 to 1700 ¿¿F (879 to 927 ¿¿C) Solidus-L..

$41.00 $81.00

SAE MA1586A

SAE MA1586A

Wrench Configuration, 12 Spline Drive, Metric..

$41.00 $81.00