• SAE J514_201201

SAE J514_201201

  • Hydraulic Tube Fittings
  • standard by SAE International, 01/06/2012
  • Category: SAE

$81.00 $41.00

This SAE Standard covers complete general and dimensional specifications for 37 degree flared and flareless types of hydraulic tube fittings and O-ring plugs. Also included are pipe fittings and adapter unions for use in conjunction with these tube fittings. These fittings are intended for general application in hydraulic systems on industrial equipment and commercial products.

These fittings are capable of providing leak-proof, full flow connections in hydraulic systems operating at working pressures as specified in Table 1 for respective sections.

Since many factors influence the pressure at which a hydraulic system will or will not perform satisfactorily, the values shown in SAE J1065 should not be construed as a guaranteed minimum.

For any application, it is recommended that sufficient testing be conducted and reviewed by both the user and fitting manufacturer to assure performance levels will be safe and satisfactory.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5356D

SAE AMS5356D

Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipita..

$41.00 $81.00

SAE AS1975G

SAE AS1975G

Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 ¿¿F, Standard Dut..

$41.00 $81.00

SAE AS39029/106C

SAE AS39029/106C

CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, (FOR MIL-DTL-38999 SERIES I, III, IV, MIL-D..

$41.00 $81.00

SAE AS4130C

SAE AS4130C

ELBOW, 45¿¿ BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS..

$41.00 $81.00