• SAE J526_201011

SAE J526_201011

  • Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing
  • standard by SAE International, 11/05/2010
  • Category: SAE

$81.00 $41.00

The SAE J526 Standard covers electric-resistance welded single-wall low-carbon steel pressure tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable for bending, flaring, beading, forming, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead. The material produced to this specification is intended to service pressure applications where severe forming and bending is not required. As this material may exhibit mechanical properties that reduce some desired forming characteristics versus SAE J356, the severity of the forming requirements of the finished assembly should be considered when utilizing material produced to this specification.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3696C

SAE AMS3696C

Aerodynamic Fairing Compound ¿¿¿55¿¿ to +85¿¿C (¿¿¿65¿¿ to +185¿¿F) (Stabilized: Jan 2012)..

$41.00 $81.00

SAE J2690_201201

SAE J2690_201201

Driveline Parking Brake Test Procedure for Medium Duty Vehicles..

$41.00 $81.00

SAE AIR4250B

SAE AIR4250B

Electronic Engine Control Specifications and Standards..

$41.00 $81.00

SAE AS598

SAE AS598

Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems..

$41.00 $81.00