• SAE J602_201102

SAE J602_201102

  • Headlamp Aiming Device for Mechanically Aimable Headlamp Units (Stabilized: Feb 2011)
  • standard by SAE International, 02/01/2011
  • Category: SAE

$81.00 $41.00

This document applies to the requirements of a device used in the field and inspection stations to aim and check aim of mechanically aimable headlamp units.

The purpose of this document is to provide a laboratory test procedure to determine whether the devices under test are capable of accurately positioning headlamp units from their aiming pads and maintaining their accuracy in service within the tolerances designated in this document.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS81820/3C

SAE AS81820/3C

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring, -6..

$41.00 $81.00

SAE AS81820/4C

SAE AS81820/4C

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Chamfered Outer Ring..

$41.00 $81.00

SAE AS81820/1C

SAE AS81820/1C

Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, ..

$41.00 $81.00

SAE AS14102D

SAE AS14102D

BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, CHAMFERED RACE, −65 TO +325 °F..

$41.00 $81.00