• SAE J683_201105

SAE J683_201105

  • Tire Chain Clearance - Trucks, Buses (Except Suburban, Intercity, and Transit Buses), and Combinations of Vehicles (Stabilized:
  • standard by SAE International, 05/17/2011
  • Category: SAE

$81.00 $41.00

The purpose of this SAE Information Report is to set up a guide as to body, frame, and wheel housing clearance to accommodate tire chains, and also the minimum bogie spacing to permit using chains on both axles. These dimensions apply to trucks, buses, and combinations of vehicles 10 001 lb (4535.06 kg) GVW and over, and are based upon recommendations of the Tire and Rim Association and of the National Association of chain Manufacturers. The diagram shows clearance for chains over the tire ONLY and allowance must be made for spring deflections in determining fender clearance.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5357D

SAE AMS5357D

Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated,..

$41.00 $81.00

SAE AMS7510/2C

SAE AMS7510/2C

Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 18 (143) 250 (Stabilized: Jun 2017)..

$41.00 $81.00

SAE AS1005H

SAE AS1005H

FITTING, TEE, STANDARD AND REDUCER, FLARELESS..

$41.00 $81.00

SAE AS20218B

SAE AS20218B

BEARING, BALL, ANTI-FRICTION, AIRFRAME..

$41.00 $81.00