• SAE J815_201211

SAE J815_201211

  • Load Deflection Testing of Urethane Foams for Automotive Seating
  • standard by SAE International, 11/19/2012
  • Category: SAE

$81.00 $41.00

Traditionally, cellular foam products have been checked for load deflection by determining the load required to effect a 25% deflection. In automotive seating, on the other hand, the load deflection checked by determining the thickness under constant force conditions to (a) indicate the initial softness of the seat cushion, (b) measure how thick the seat cushion is under average passenger load (a measurement of padding left for "ride" and seated height), and (c) determine a value to indicate resiliency. In this method these measurements are made by determining the thickness of the seat cushiong under fixed loads of 4.5 N, 110 N, and 220 N with a 323 cm\u2 circular indentor foot.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE J1113/3_201008

SAE J1113/3_201008

Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power..

$41.00 $81.00

SAE J1754/2_201008

SAE J1754/2_201008

Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information..

$41.00 $81.00

SAE J1754/3_201008

SAE J1754/3_201008

Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information..

$41.00 $81.00

SAE J1926/4_201008

SAE J1926/4_201008

Connector for Fluid Power and General Use¿¿¿Ports and Stud End with ASME B1.1 Threads and O-Ring Sea..

$41.00 $81.00