• SAE J826_201511

SAE J826_201511

  • Devices for Use in Defining and Measuring Vehicle Seating Accommodation
  • standard by SAE International, 11/10/2015
  • Category: SAE

$81.00 $41.00

The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from: SAE International 400 Commonwealth Drive Warrendale, PA 15096-0001 Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C. Additional considerations are necessary when a Head Restraint Measuring Device (HRMD) is mounted to an H-point machine (Appendix D).
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS6322P

SAE AMS6322P

Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)..

$41.00 $81.00

SAE AMS6361F

SAE AMS6361F

Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength..

$41.00 $81.00

SAE AMS6362G

SAE AMS6362G

Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength..

$41.00 $81.00

SAE J1475_201406

SAE J1475_201406

Hydraulic Hose Fitting for Marine Applications (Stabilized: Jun 2014)..

$41.00 $81.00