• SAE J880_201110

SAE J880_201110

  • Brake System Rating Test Code - Commercial Vehicles
  • standard by SAE International, 10/05/2011
  • Category: SAE

$81.00 $41.00

This code is intended for commercial vehicles over 4500 kg (10 000 lb) with brake systems having typical service pressure ranges 0 to 14.1 MPa (0 to 2050 psi) hydraulic or 0 to 830 kPa (0 to 120 psi) air and is not directly applicable to vehicles with other systems. Air over hydraulic systems are to be tested as air systems.

The code provides test procedures and instructions for: a. instrumentation and equipment; b. vehicle preparation; c. determining brake system energy absorption capacity; and d. calculation of brake rating.

The purpose of this code is to provide a method for determining a brake system rating for new commercial highway vehicles, based on the energy absorption and dissipation capacity of the brake system as established by a repeated test procedure. For performance requirements, refer to SAE J257 (FEB97).

The code includes provision for those single unit, combination, and special vehicles which cannot be loaded to the manufacturer's gross vehicle weight rating, or cannot be accelerated in the time interval required, or cannot attain the specified 80,5 km/h (50 mph) speed.

Methods for measuring energy absorption capacity, other than described herein, may be equally valid
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4112

SAE AS4112

PRODUCTION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS REMOTE TERMIN..

$41.00 $81.00

SAE AS4113

SAE AS4113

VALIDATION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLE..

$41.00 $81.00

SAE AS4114

SAE AS4114

PRODUCTION TEST PLAN FOR THE TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLERS..

$41.00 $81.00

SAE AS4115

SAE AS4115

TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS SYSTEM..

$41.00 $81.00