• SAE J953_201105

SAE J953_201105

  • Passenger Car Backlight Defogging System (Stabilized: May 2011)
  • standard by SAE International, 05/26/2011
  • Category: SAE

$81.00 $41.00

The scope of this SAE Recommended Practice is to establish uniform test procedures for passenger cars, to determine whether the system is defined as a defroster or defogger, and to establish minimum performance requirements for each system. A defroster for purposes of this practice is a system which will remove moisture and/or frost from the interior surface of the backlight at -18 degrees C. A defogger is a system which will remove moisture and/or fog from the interior surface of the backlight at 4 degrees C. The test procedure is intended to simulate actual conditions by utilizing either a cold room with an appropriate device to introduce air flow over the backlight or a sufficiently large wind tunnel with ambient temperature control. The test procedure and the minimum performance requirements are based on currently available engineering data.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS3634E

SAE AMS3634E

Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkab..

$41.00 $81.00

SAE AMS3635E

SAE AMS3635E

Plastic Sheet and Strip, Modified Vinyl, Foamed Closed Cell (Stabilized: Jan 2012)..

$41.00 $81.00

SAE AMS3636H

SAE AMS3636H

Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2..

$41.00 $81.00

SAE AMS3637G

SAE AMS3637G

Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable, 2 to ..

$41.00 $81.00