• SAE J968/2_201509

SAE J968/2_201509

  • Diesel Injection Pump Testing¿¿¿Part 2: Orifice Plate Flow Measurement
  • standard by SAE International, 09/22/2015
  • Category: SAE

$81.00 $41.00

This part of SAE J968 specifies the flow measuring system, including the fixture, to be used for flow testing the single hole orifice plates used in an orifice plate type nozzle and holder assembly (described in SAE J968/1) which is intended for testing and setting diesel fuel injection pumps on test benches.

The flow measuring system and fixture ensure accurate flow testing of the entire range of orifices from 0.4 to 0.8 mm diameter as specified in SAE J968/1. It is intended primarily for use by the manufacturers of single hole orifice plates.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5581F

SAE AMS5581F

Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb ..

$41.00 $81.00

SAE AMS5588G

SAE AMS5588G

Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18..

$41.00 $81.00

SAE AMS5832G

SAE AMS5832G

Nickel Alloy, Corrosion and Heat Resistant, Welding Wire, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti..

$41.00 $81.00

SAE AS 4373D

SAE AS 4373D

Test Methods for Insulated Electric Wire..

$41.00 $81.00