• SAE MA1943A

SAE MA1943A

  • Nuts, Self-Locking, UNS N07001 730¿¿C, 1100 MPa, and 1210 MPa Procurement Specification For, Metric
  • standard by SAE International, 11/08/2012
  • Category: SAE

$81.00 $41.00

This procurement specification covers aircraft quality self-locking nuts for wrenching (hex, spline) and anchor (plate, gang channel, shank) type of nuts made from a corrosion and heat resistant nickel-base alloy of the type identified under the Unified Numbering System as UNS N07001. Tension height nuts having overall length of threaded portion not less than 1.2 times the nominal thread diameter have 120 MPa minimum tensile strength at room temperature. Shear height nuts having shorter threaded portion have 1100 MPa minimum tensile strength at room temperature. Maximum test temperature of parts is 730 degrees C.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS7913D

SAE AMS7913D

Aluminum-Beryllium Alloy, Sheet and Plate 38Al - 62Be..

$41.00 $81.00

SAE AMS5704K

SAE AMS5704K

Nickel Alloy, Corrosion and Heat-Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al ..

$41.00 $81.00

SAE AMS4520L

SAE AMS4520L

Leaded Phosphor Bronze Strip 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P Cold Rolled, Half Hard (HO2)..

$41.00 $81.00

SAE AMS4930H

SAE AMS4930H

Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed..

$41.00 $81.00