• SAE MA3375C

SAE MA3375C

  • Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric
  • standard by SAE International, 08/08/2011
  • Category: SAE

$81.00 $41.00

This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Number System as UNS S66286. The following specification designations and their properties are covered: MA3375 900 MPa minimum ultimate tensile strength at room temperature; MA3375-1 900 MPa minimum ultimate tensile strength at room temperature, 480 MPa stress-rupture strength at 650 degrees C; MA3375-2 900 MPa minimum ultimate tensile strength at room temperature, 590 MPa minimum ultimate shear strength at room temperature.

Two types of studs are covered as follows: Type I - studs with stud end thread having special oversize pitch diameter and lead thread with undersize pitch diameter, while nut end thread is standard size; and Type II - studs with stud end thread and nut end thread standard size.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS1339G

SAE AS1339G

Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraul..

$41.00 $81.00

SAE AMS6407J

SAE AMS6407J

Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 – 0.33C)..

$41.00 $81.00

SAE AMS7707D

SAE AMS7707D

Iron, Commercially Pure, Bar, Sheet, Strip, and Plate Hot Rolled, Unannealed..

$41.00 $81.00

SAE AMS7718G

SAE AMS7718G

Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, and Forgings, 50Ni - 50Fe..

$41.00 $81.00