• SAE USCAR12-4

SAE USCAR12-4

  • ELECTRICAL CONNECTOR DESIGN CRITERIA
  • standard by SAE International, 02/12/2016
  • Category: SAE

$81.00 $41.00

This document gives specific and measurable design criteria to be applied at a design review prior to tooling. The specification is formatted as a checklist to aid in its use. The requirements do not apply in all situations so engineering judgment must be used. This is a specification for design criteria; applicable performance specifications (USCAR-2, etc.) must still be performed.

Items in this document are grouped by component as follows:

  1. Terminals

  2. Secondary Terminal Locks

  3. Connectors

  4. Connector Locks

  5. Secondary Connector Locks (Connector Position Assurance, CPA)

  6. Connector Seals

  7. Serviceability

  8. High Voltage (≥60V) Application Requirements

  9. Drawing and General Requirements

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS157G

SAE AS157G

HOSE ASSEMBLY, PTFE, CRES REINFORCED, 3000 PSI, 400 °F, 45° TO 90°, FLARED, LIGHTWEIGHT..

$41.00 $81.00

SAE J361_201704

SAE J361_201704

Procedure for Visual Evaluation of Interior and Exterior Automotive Trim..

$41.00 $81.00

SAE AMS5549H

SAE AMS5549H

Steel, Corrosion and Heat Resistant, Plate 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated (Sta..

$41.00 $81.00

SAE AMS4285F

SAE AMS4285F

Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treat..

$41.00 $81.00