• SCTE 152 2008

SCTE 152 2008

  • Test Procedure for Contact Resistance Measurement of Mainline Plug Interface
  • standard by Society of Cable Telecommunication Engineers, 01/01/
  • Category: SCTE

$50.00 $25.00

The purpose of this document is to recommend mechanical, environmental and electrical standards for broadband radio frequency (RF) devices whose primary purpose is to divide signals presented to an input port among two or more output ports with a fixed division ratio that is nominally independent of frequency within the specified bandwidth limits of the device. Alternately, such devices can be used to combine signals from several input ports into a common output port. Its scope is limited to 75-ohm devices whose ports are provided with type F connectors. The most common use for such devices is on-premises RF signal distribution.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SCTE 48-1 2015

SCTE 48-1 2015

Test Method for Measuring Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell..

$25.00 $50.00

SCTE 211 2015

SCTE 211 2015

Energy Metrics for Cable Operator Access Networks..

$25.00 $50.00

SCTE 215-2 2015

SCTE 215-2 2015

HEVC Video Constraints for Cable Television Part 2 - Transport..

$25.00 $50.00

SCTE 06 2015

SCTE 06 2015

Composite Distortion Measurements (CSO & CTB)..

$25.00 $50.00