• SCTE 153 2008

SCTE 153 2008

  • Drop Passives: Splitters, Couplers and Power Inserters
  • standard by Society of Cable Telecommunication Engineers, 01/01/
  • Category: SCTE

$50.00 $25.00

The purpose of this document is to recommend mechanical, environmental and electrical standards for broadband radio frequency (RF) devices whose primary purpose is to divide signals presented to an input port among two or more output ports with a fixed division ratio that is nominally independent of frequency within the specified bandwidth limits of the device. Alternately, such devices can be used to combine signals from several input ports into a common output port. Its scope is limited to 75-ohm devices whose ports are provided with type F connectors. The most common use for such devices is on-premises RF signal distribution.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SCTE 86 2005

SCTE 86 2005

SCTE Recommended Optical Fiber Cable Types for Outside Plant Trunk and Distribution Applications..

$25.00 $50.00

SCTE 23-1 2005

SCTE 23-1 2005

DOCSIS 1.1 Part 1: Radio Frequency Interface..

$25.00 $50.00

SCTE 114 2005

SCTE 114 2005

Test Method for Dimensions of Corrugated Subscriber Access Cable..

$25.00 $50.00

SCTE 110 2005

SCTE 110 2005

Hybrid Fiber Coax Outside Plant Status Monitoring: Alternative Power Supply to Transponder Interface..

$25.00 $50.00