• SMPTE 292-0:2011

SMPTE 292-0:2011

  • 1.5 Gb/s Signal Data Serial Interface - Roadmap for the 292 Document Suite
  • standard by Society of Motion Picture and Television Engineers,
  • Category: SMPTE

$15.00 $13.00

This standard defines a bit-serial data structure and the coaxial cable interface specifications for 1.5 Gb/s [nominal] Signal/Data Serial Interface to carry either 1280x720, 1920x1080 or 2048x1080 active pixel formats mapped into the 1.5 Gb/s payload. This standard defines the method of serializing the parallel source format data to a serial bit stream. This interface may also carry packetized data mapped into the 1.5 Gb/s transport payload providing the constraints imposed by the reference source image formats are observed.
This standard specifies a coaxial cable interface suitable for application where the signal loss does not exceed an amount specified by the receiver manufacturer, typical loss amounts would be in the range of up to 20 dB at one-half the clock frequency.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SMPTE RP 165-1994

SMPTE RP 165-1994

Error Detection Checkwords and Status Flags for Use in Bit-Serial Digital Interfaces for Television..

$25.00 $50.00

SMPTE 143-1994

SMPTE 143-1994

Motion-Picture Film (8-mm Type R) - Length of Film on Camera Spools - 25-Ft Capacity (R2003)..

$25.00 $50.00

SMPTE 37M-1994

SMPTE 37M-1994

Motion-Picture Equipment - Raw Stock Cores (R2003)..

$25.00 $50.00

SMPTE RP 27.4-1994 (Archived 2004)

SMPTE RP 27.4-1994 (Archived 2004)

Specifications for an Operational Test Pattern for Checking Jitter, Weave and Travel Ghost in Televi..

$25.00 $50.00