• SMPTE 310M-2004

SMPTE 310M-2004

  • Television - Synchronous Serial Interface for MPEG-2 Digital Transport Streams
  • standard by Society of Motion Picture and Television Engineers,
  • Category: SMPTE

$50.00 $25.00

This standard describes the physical interface and modulation characteristics for a synchronous serial interface to carry MPEG-2 transport bit streams at rates up to 40 Mb/s. It is a point-to-point interface intended for use in a low-noise environment. The low-noise environment is defined as a noise level that would corrupt no more than one MPEG-2 data packet per day at the transport clock rate. When other transmission systems (e.g., studio-to-transmitter microwave links, etc.) are interposed between devices employing this interface, higher noise levels may be encountered. In such cases, it is recommended that appropriate error correcting methods be used.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SMPTE RP 2096-1:2017

SMPTE RP 2096-1:2017

Cinema Sound System Baseline Setup and Calibration..

$25.00 $50.00

SMPTE ST 336:2017

SMPTE ST 336:2017

Data Encoding Protocol Using Key-Length Value..

$88.00 $175.00

SMPTE ST 2114:2017

SMPTE ST 2114:2017

Unique Digital Media Identifier (C4 ID)..

$40.00 $80.00

SMPTE ST 2082-30:2017

SMPTE ST 2082-30:2017

Transport of Multiple 3Gb/s or 1.5Gb/s Signals on a 12G-SDI Link..

$40.00 $80.00