• SMPTE RP 175-1997

SMPTE RP 175-1997

  • Digital Interface for 4:4:4:4 Component Video Signals (Dual Link)
  • standard by Society of Motion Picture and Television Engineers,
  • Category: SMPTE

$50.00 $25.00

This practice describes a means of interconnecting digital video equipment operating in system M (525/60) and complying with the 4:4:4 sampling and encoding parameters defined in CCIR Recommendation 601-2, annex 1, with a nominal sampling frequency of 13.5 MHz. Provision is made to carry a fourth, auxiliary, channel as part of the signal multiplex, yielding 4:4:4:4 (or 4x4) overall.
The interface is primarily defined to convey signals having luminance, color-difference, and auxiliary components. Signals having green, red, blue, and auxiliary components may alternatively be conveyed, as described in clause 6.
This is a 10-bit interface; however, provision has been made to interconnect all signals with 8- or 10-bit precision.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SMPTE 257-1998

SMPTE 257-1998

Motion-Picture Film (35-mm) - Stereoscopic Prints with Vertically Positioned Subframes - Projectable..

$25.00 $50.00

SMPTE 15M-1998 (Archived 2004)

SMPTE 15M-1998 (Archived 2004)

Television Analog Recording - 1-in Type B Helical Scan - Basic System Parameters..

$25.00 $50.00

SMPTE RP 111-1999

SMPTE RP 111-1999

Dimensions for 70-, 65- and 35-mm Motion-Picture Film Splices (R2004)..

$25.00 $50.00

SMPTE RP 144-1999 (Archived 2004)

SMPTE RP 144-1999 (Archived 2004)

Basic System and Transport Geometry Parameters for 1/2-in Type L Format..

$25.00 $50.00