• ULC 701

ULC 701

  • Standard for Thermal Insulation, Polystyrene, Boards and Pipe Covering (CAN/ULC S701-11)
  • standard by Underwriters Laboratories of Canada, 03/01/2011
  • Category: ULC

$238.00 $119.00

This Standard specifies the requirements for factory made rigid polystyrene insulation in the form of pipe covering and boards with or without facings or coatings made by moulding of pre-expanded beads (EPS) or extrusion of polystyrene (XPS). This Standard does not apply to laminated products manufactured with any type of rigid board facer including fibreboard, perlite board, gypsum board, or oriented strand board.
The Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The Standard covers four types of rigid expanded polystyrene distinguished on the basis of their material properties. Products manufactured to meet the requirements of this Standard are intended for use as thermal insulation in building construction and other applications for temperatures ranging from -54 °C to +75 °C.
Products covered by this Standard are also used for sound insulation and in prefabricated thermal insulation systems and composite panels. The performance of systems incorporating these products is not covered.
Requirements for flat, uncoated EPS thermal insulation boards for use in exterior insulation and finish systems (EIFS) are addressed in an informative annex.
Recommended practices for verification of quality consistency by the manufacturer and by a third party are included in an informative annex.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ULC 711.2

ULC 711.2

Standard for Thermal Insulation - Bead-Applied Two Component Polyurethane Air Sealant Foam - Part 2:..

$96.00 $192.00

ULC 710.2

ULC 710.2

Standard for Thermal Insulation - Bead-Applied One Component Polyurethane Air Sealant Foam - Part 2:..

$78.00 $155.00

ULC 711.1

ULC 711.1

Standard for Thermal Insulation - Bead-Applied Two Component Polyurethane Air Sealant Foam Part 1: M..

$121.00 $242.00

ULC 710.1

ULC 710.1

Standard for Thermal Insulation - Bead - Applied One Component Polyurethane Air Sealant Foam, Part 1..

$119.00 $237.00