• ULC 702.1

ULC 702.1

  • Standard for Mineral Fibre Thermal Insulation for Buildings, Part 1: Material Specification (CAN/ULC-S702.1:2014-AMD1)
  • standard by Underwriters Laboratories of Canada, 04/01/2016
  • Category: ULC

$264.00 $132.00

This Standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts, rolls and boards. Where facings are used, they shall be either permeable or vapour retarding membranes, as defined in Table 1 for Types 2 and 3, respectively. This standard does not permit the application of kraft paper facings on batts and rolls. It also applies to loose fill mineral fibre thermal insulation when used in unconfined spaces with slopes not exceeding 4.5:12.
This Standard specifies performance requirements and test methods for the products used under normal climatic conditions to thermally insulate attics, floors, ceilings and walls (above and below ground grade) in light frame construction buildings and manufactured housing.
This Standard also includes requirements for the manufacturer to provide the Job Site Certificate for use by the applicators.
Recommended practice for verification of quality consistency by the manufacturer and by a third party are included in Annex B for preformed insulation and Annex C for loose fill insulation.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ULC 543

ULC 543

Standard for Internal Lug Quick-Connect Couplings for Fire Hose (CAN/ULC S543)..

$110.00 $220.00

ULC 636 CRD

ULC 636 CRD

Standard for Type BH Gas Venting Systems (Certification Requirement Decision, 4/18/2009)..

$77.00 $153.00

ULC Subject 503

ULC Subject 503

Standard for Carbon-Dioxide Fire Exinguishers (Bulletin, 4/20/2009)..

$93.00 $185.00

ULC 662

ULC 662

Standard for Factory-Built Grease Ducts (CAN/ULC S662-09)..

$106.00 $212.00