ULC 710.1
- Standard for Thermal Insulation - Bead - Applied One Component Polyurethane Air Sealant Foam, Part 1: Material Specification (CA
- standard by Underwriters Laboratories of Canada, 12/01/2011
- Category: ULC
$237.00
$119.00
This Standard specifies the requirements and test methods for bead-applied one component polyurethane foam used as an insulating air sealant for both building and non-building applications. This Standard covers bead-applied one-component polyurethane air sealant foam whether applied on a building site or in a prefabrication (manufacturing) process. The one-component polyurethane foam is factory pre-packaged.
The requirements in this Standard apply only to the use of bead-applied one component polyurethane foam when the continuous service temperature is in the range of -60 to +110 °C.
The test methods used to determine the material properties provide a means of comparing different polyurethane air sealant foams. They are intended for use in specifications, product evaluations and quality control.
Applications and requirements for the applications are included in the CAN/ULC-S710.2 Installation Standard.
The requirements in this Standard apply only to the use of bead-applied one component polyurethane foam when the continuous service temperature is in the range of -60 to +110 °C.
The test methods used to determine the material properties provide a means of comparing different polyurethane air sealant foams. They are intended for use in specifications, product evaluations and quality control.
Applications and requirements for the applications are included in the CAN/ULC-S710.2 Installation Standard.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
