• UOP 1009-15

UOP 1009-15

  • Total Mercury in Solids
  • standard by UOP LLC, A Honeywell Company, 12/23/2015
  • Category: UOP

$240.00 $120.00

This method is for determining total mercury in solid materials using a Nippon INstruments Corporation (NIC) MA-3000 Mercury Analyzer. The instrument uses a dual path detector to measure from the lower limit of 0.1 ng/g (mass-ppb) to an upper limit of 500 μg/g (mass-ppm), when analyzing a 50 mg sample. This procedure can also be used for aqueous liquid samples and high boiling hydrocarbons (such as crude or shale oil) through the use of approprate combustion programs. Volatile hydrocarbons (e.g. naphtha and BTX aromatics) should be analyzed by UOP Method 938.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

UOP 606-78

UOP 606-78

Chloride in Hydrocarbons by Oxy-Hydrogen Combustion..

$144.00 $287.00

UOP 787-78

UOP 787-78

Silicones in Petroleum Distillates by Atomic Absorption Spectrophotometry..

$144.00 $287.00

UOP 211-79

UOP 211-79

Caustic Solutions Analysis - Liberation Method..

$144.00 $287.00

UOP 569-79

UOP 569-79

Methanol in Petroleum Distillates and LPG by Gas Chromatography..

$144.00 $287.00