• UOP 389-04

UOP 389-04

  • Trace Metals in Oils by Wet Ashing and ICP-OES
  • standard by UOP LLC, A Honeywell Company, 11/10/2004
  • Category: UOP

$287.00 $144.00

This method is for determining iron (Fe), nickel (Ni), vanadium (V), lead (Pb), copper (Cu), sodium (Na), molybdenum (Mo), manganese (Mn), chromium (Cr), magnesium (Mg), tin (Sn), calcium (Ca), aluminum (Al) and zinc (Zn) in crude petroleum, oils, jet fuels, gas oils, asphalts, and polymers. Most of the elements can be determined within the concentration range of 0.02 to 200 mass-ppm when a 50-g sample of oil is ashed. Higher or lower concentrations can be determined by ashing appropriate-sized samples and/or modifying the instrument operating parameters. Determination of additional elements is possible if they are not volatilized during the ashing step and do not form insoluble sulfates.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

UOP 163-10

UOP 163-10

Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration..

$120.00 $240.00

UOP 733-10

UOP 733-10

Residual Triglycerides in Deoxygenated Feedstocks by GC..

$120.00 $240.00

UOP 938-10

UOP 938-10

Total Mercury and Mercury Species in Liquid Hydrocarbons..

$120.00 $240.00

UOP 965-10

UOP 965-10

Total Cycloparaffins and Total Aromatics in Synthetic Paraffinic Kerosene Fuels by Comprehensive Two..

$120.00 $240.00