UOP 389-09
- Trace Metals in Organics by Wet Ashing - ICP-OES
- standard by UOP LLC, A Honeywell Company, 04/01/2009
- Category: UOP
$287.00
$144.00
This method is for determining the concentrations of aluminum (Al), calcium (Ca), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), lead (Pb), lithium (Li), magnesium (Mg), manganese (Mn), molybdenum (Mo), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), sodium (Na), tin (Sn), titanium (Ti), vanadium (V), and zinc (Zn) in organic matrices such as crude petroleum, asphalts, vacuum tower bottoms, vacuum gas oils, atmospheric gas oils, diesel and jet fuels and their blending components, and polymers, by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES). Most of the elements can be determined within the concentration range of 0.02 to 200 mg/kg when a 50-g sample is ashed. Higher or lower concentrations can be determined by changing sample weight, dilution volume, and/or modifying the instrument operating parameters. Determination of additional elements is possible if they are not volatilized during the ashing step and do not form insoluble sulfates.
Alternatively, some the elements listed above may be analyzed by Atomic Absorption Spectroscopy (AAS). See UOP Method 391, "Trace Metals in Petroleum Products or Organics by AAS," for specific metals and their range of quantitation.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
