• UOP 539-12

UOP 539-12

  • Refinery Gas Analysis by GC
  • standard by UOP LLC, A Honeywell Company, 08/01/2012
  • Category: UOP

$240.00 $120.00

This method is for determining the composition of refinery gas streams or vaporized liquefied petroleum gas (LPG) using a preconfigured, commercially available gas chromatograph. At a minimum, the following components are reported: non-condensable gases, individual C1 through C4 hydrocarbons and C5 paraffins. C5 olefins and C6+ hydrocarbons are reported as a composite. Some configurations of the analyzer will separate the C5 olefins and certain C6+ hydrocarbons. Oxygen is not separated from argon. Results for hydrogen sulfide, if present, may not be quantitative on some analyzers. The lower limit of quantitation for each component or composite is 0.05 mol-%. If the measurement of lower concentrations of hydrocarbons are needed, use UOP Method 899, “Trace Hydrocarbons in Hydrogen, Hydrocarbon Gases, or LPG by GC.” LPG samples may be analyzed by UOP Method 373, “Composition of C2 through C5 Hydrocarbon Mixtures by GC,” or UOP Method 980, “C5 and Lower Boiling Dienes, Olefins, and Paraffins in Naphthas by GC.” Alternatively, LPG samples may be expanded to the gas phase and run by this method.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

UOP 437-81

UOP 437-81

Size Distribution of Molecular Sieve Particles..

$144.00 $287.00

UOP 438-81

UOP 438-81

Attrition of Molecular Sieve Particles..

$144.00 $287.00

UOP 549-81

UOP 549-81

Sodium in Petroleum Distillates by Flame Emission, Using an Atomic Absorption Spectrophotometer..

$144.00 $287.00

UOP 818-81

UOP 818-81

Thiosulfate in Lean Amine Solutions..

$120.00 $240.00