• UOP 578-11

UOP 578-11

  • Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
  • standard by UOP LLC, A Honeywell Company, 02/01/2011
  • Category: UOP

$240.00 $120.00

This method is for determining the pore size distribution and pore area of materials by mercury intrusion. Total port volume (intrusion volume), total pore area, bulk (piece) density and apparent (skeletal) density are also determined. At the maximum pressure of 413,700 kPa (60,000 psia) pores as small as 0.003 µm are filled. This method is applicable to materials which are essentially non-compressible at the pressures attained during analysis. The sample must also be non-wetting and non-reactive with mercury, and not larger than a right circular cylinder having 25-mm diameter with a length of 25-mm.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

UOP 980-17

UOP 980-17

C5 and Lower Boiling Dienes, Olefins, and Paraffins in Naphthas by GC..

$120.00 $240.00

UOP 1021-17

UOP 1021-17

Determination of Trace Methyl and Ethyl Mercaptan in Polymer Grade Ethylene & Propylene by Gas C..

$144.00 $287.00

UOP 1024-18

UOP 1024-18

Determination of Trace Permanent Gases in Polymer Grade Ethylene & Propylene by Gas Chromatograp..

$120.00 $240.00

UOP 1022-18

UOP 1022-18

Determination of Trace Carbonyl Sulfide and Hydrogen Sulfide in Polymer Grade Ethylene & Propylene b..

$120.00 $240.00