• UOP 864-89

UOP 864-89

  • Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
  • standard by UOP LLC, A Honeywell Company, 01/01/1989
  • Category: UOP

$287.00 $144.00

This method is for determining total sulfur in petroleum products and other organic/inorganic materials, such as catalysts, using a LECO Sulfur Analyzer. The detection range is from 100% down to a lower limit of 0.01 mass-% sulfur. Nitrogen and halogens do not interfere unless they are present in concentrations ten times higher than that of the sulfur. The method is generally limited to samples having initial boiling points above 200 C. However, it can be applied to some wider boiling rage samples, such as crude oils, where experience has shown that no losses occur during the combustion process.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

UOP 800-79

UOP 800-79

Vanadium, Nickel and Iron in Petroleum Oils by Atomic Absorption Spectrophotometry..

$144.00 $287.00

UOP 802-80

UOP 802-80

Attrition of Charcoal Particles..

$144.00 $287.00

UOP 816-80

UOP 816-80

Refractive Index of Hydrocarbon Liquids..

$144.00 $287.00

UOP 614-80

UOP 614-80

Heptane-Insoluble Matter in Petroleum Oils Using a Membrane Filter..

$144.00 $287.00