• UOP 927-92

UOP 927-92

  • Trace Metallic Impurities in Fresh Catalysts by ICP-AES
  • standard by UOP LLC, A Honeywell Company, 01/01/1992
  • Category: UOP

$240.00 $120.00

This method is for determining trace levels of iron, sodium, calcium, magnesium, titanium, molybdenum and silicon in fresh alumina supported catalysts of known composition by Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES). All these elements except silicon can also be determined in fresh silica-alumina supported catalysts. The method is sufficiently flexible to permit the determination of other metals at trace levels if they can be brought into solution using the sample preparation procedure described. Concentration ranges covered are listed in Table 1. Catalysts containing alpha- or theta-alumina phases cannot be analyzed by this method.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

UOP 683-86

UOP 683-86

Sulfide in Refinery Waste Water..

$144.00 $287.00

UOP 114-86

UOP 114-86

Relative Density of Gas by Schilling Effusion Method..

$144.00 $287.00

UOP 389-86

UOP 389-86

Trace Metals in Oils by Wet Ash / ICP—AES..

$144.00 $287.00

UOP 551-86

UOP 551-86

Hexanes and Lower Boiling Hydrocarbons in Olefin Free Gasolines by GC..

$144.00 $287.00