UOP 987-15
- Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
- standard by UOP LLC, A Honeywell Company, 01/01/2015
- Category: UOP
$240.00
$120.00
This method is for determining sulfur in liquid hydrocarbons at concentrations ranging from 10 to 1500 ng/g (mass-ppb). A direct measurement procedure (Part A) is used for samples above 100 ng/g. A trap & release procedure (Part B) is used for samples between 10 and 200 ng/g where high precision is required. This method is also applicable to highly volatile samples, such as pentane, through the use of a cooled sampling system.
Higher concentrations can be determined by ASTM Method D5453, "Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence" and D7183, "Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence" using the cooled sampling system described herein for highly volatile matrices.
Halogens interfere at concentrations greather than approximately 0.3%. The method has reduced sensitivity to sulfur present as a sulfate. For Part A, nitrogen content must not exceed sulfur by more than 100-fold to prevent a positive bias to the results.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
